[BFGMINER 3.6.0]same "detected new block" i "requested work"

[marcinpl87]

Witam, mój pierwszy post więc proszę o wyrozumiałość

Kopię na linuxie z podłączonym jednym "ASIC Block Erupter Bitcoin USB 337MH/s", używam BFGMINER w wersji 3.6.0 , mam konto w polskiej kopalni polmine.pl .
Bfgminer'a uruchamiam tak:

Kod: Zaznacz cały

./bfgminer -o http://api.polmine.pl:8347 -u marcinpl8712839m1 -p ***************** -S all

Jednak moja konsola wygląda tak:

Kod: Zaznacz cały

bfgminer version 3.6.0 - Started: [2013-11-16 01:23:32] - [  0 days 01:44:14]
 [M]anage devices [P]ool management [S]ettings [D]isplay options  [H]elp [Q]uit
 Connected to api.polmine.pl diff 1 with LP as user marcinpl8712839m1
 Block: ...7f171661 #269848  Diff:511M ( 3.66Ph/s)  Started: [03:06:13]
 ST:2  F:0  NB:22  AS:0  BW:[731/ 10 B/s]  E:0.00  I:28.18nBTC/hr  BS:6
 1            | 341.4/400.5/ 0.69Mh/s | A:1 R:0+0(none) HW:332/100%
--------------------------------------------------------------------------------
 ICA 0:       | 303.8/400.6/ 0.69Mh/s | A:1 R:0+0(none) HW:332/100%
--------------------------------------------------------------------------------
 [2013-11-16 01:59:44] Longpoll from pool 0 requested work update
 [2013-11-16 02:00:19] Longpoll from pool 0 detected new block
 [2013-11-16 02:00:20] Longpoll from pool 0 requested work update
 [2013-11-16 02:06:33] Longpoll from pool 0 detected new block
 [2013-11-16 02:06:38] Longpoll from pool 0 requested work update
 [2013-11-16 02:13:06] Longpoll from pool 0 detected new block
 [2013-11-16 02:13:11] Longpoll from pool 0 requested work update
 [2013-11-16 02:16:02] Longpoll from pool 0 detected new block
 [2013-11-16 02:16:08] Longpoll from pool 0 requested work update
 [2013-11-16 02:32:45] Accepted 29793c0b ICA 0  Diff 6/1
 [2013-11-16 02:37:56] Longpoll from pool 0 detected new block
 [2013-11-16 02:38:01] Longpoll from pool 0 requested work update
 [2013-11-16 02:40:37] Longpoll from pool 0 detected new block
 [2013-11-16 02:40:43] Longpoll from pool 0 requested work update
 [2013-11-16 02:44:55] Longpoll from pool 0 detected new block
 [2013-11-16 02:45:00] Longpoll from pool 0 requested work update
 [2013-11-16 02:54:06] Longpoll from pool 0 detected new block
 [2013-11-16 02:54:11] Longpoll from pool 0 requested work update
 [2013-11-16 02:56:38] Longpoll from pool 0 detected new block
 [2013-11-16 02:56:43] Longpoll from pool 0 requested work update
 [2013-11-16 03:01:15] Longpoll from pool 0 detected new block
 [2013-11-16 03:01:20] Longpoll from pool 0 requested work update
 [2013-11-16 03:01:25] Longpoll from pool 0 detected new block
 [2013-11-16 03:01:30] Longpoll from pool 0 requested work update
 [2013-11-16 03:05:53] Longpoll from pool 0 detected new block
 [2013-11-16 03:05:58] Longpoll from pool 0 requested work update
 [2013-11-16 03:06:13] Longpoll from pool 0 detected new block
 [2013-11-16 03:06:18] Longpoll from pool 0 requested work update

później wyglądała jeszcze tak:

Kod: Zaznacz cały

bfgminer version 3.6.0 - Started: [2013-11-16 01:23:32] - [  0 days 01:59:40]
 [M]anage devices [P]ool management [S]ettings [D]isplay options  [H]elp [Q]uit
 Connected to api.polmine.pl diff 1 with LP as user marcinpl8712839m1
 Block: ...155c6f3f #269853  Diff:511M ( 3.66Ph/s)  Started: [03:21:12]
 ST:3  F:0  NB:27  AS:0  BW:[683/ 10 B/s]  E:0.00  I:24.55nBTC/hr  BS:6
 1            | 379.9/399.0/ 0.60Mh/s | A:1 R:0+0(none) HW:369/100%
--------------------------------------------------------------------------------
 ICA 0:       | 325.3/399.0/ 0.60Mh/s | A:1 R:0+0(none) HW:370/100%
--------------------------------------------------------------------------------
 [2013-11-16 02:38:01] Longpoll from pool 0 requested work update
 [2013-11-16 02:40:37] Longpoll from pool 0 detected new block
 [2013-11-16 02:40:43] Longpoll from pool 0 requested work update
 [2013-11-16 02:44:55] Longpoll from pool 0 detected new block
 [2013-11-16 02:45:00] Longpoll from pool 0 requested work update
 [2013-11-16 02:54:06] Longpoll from pool 0 detected new block
 [2013-11-16 02:54:11] Longpoll from pool 0 requested work update
 [2013-11-16 02:56:38] Longpoll from pool 0 detected new block
 [2013-11-16 02:56:43] Longpoll from pool 0 requested work update
 [2013-11-16 03:01:15] Longpoll from pool 0 detected new block
 [2013-11-16 03:01:20] Longpoll from pool 0 requested work update
 [2013-11-16 03:01:25] Longpoll from pool 0 detected new block
 [2013-11-16 03:01:30] Longpoll from pool 0 requested work update
 [2013-11-16 03:05:53] Longpoll from pool 0 detected new block
 [2013-11-16 03:05:58] Longpoll from pool 0 requested work update
 [2013-11-16 03:06:13] Longpoll from pool 0 detected new block
 [2013-11-16 03:06:18] Longpoll from pool 0 requested work update
 [2013-11-16 03:09:17] Staged work underrun; increasing queue minimum to 2
 [2013-11-16 03:11:11] Longpoll from pool 0 detected new block
 [2013-11-16 03:11:16] Longpoll from pool 0 requested work update
 [2013-11-16 03:14:28] Longpoll from pool 0 detected new block
 [2013-11-16 03:14:33] Longpoll from pool 0 requested work update
 [2013-11-16 03:14:53] Longpoll from pool 0 detected new block
 [2013-11-16 03:14:58] Longpoll from pool 0 requested work update

Pytanie - dlaczego ciągle powtarza to
Longpoll from pool 0 requested work update
Longpoll from pool 0 detected new block
?

Oraz czy program rozpoznaje poprawnie ten ASIC Block Erupter ?
Przeczytałem dużo opisów interface'u BfgMinera oraz manual tego programu, ale nie widziałem żeby ktoś łopatologicznie napisał co dokładnie znaczy to "ICA 0: | 325.3/399.0/ 0.60Mh/s | A:1 R:0+0(none) HW:370/100%" :/ . Skąd mogę wiedzieć czy on używa tego eruptera czy to jest CPU mojego komputera?

dzięki za pomoc i pozdrawiam

[hanti]

odpal tak

Kod: Zaznacz cały

./bfgminer -o stratum+tcp://api.polmine.pl:8361 -u marcinpl8712839m1 -p ***************** -S erupter:all

[marcinpl87]

ok, dziękuję, odpaliłem bfgminer'a tak jak pisałeś, teraz mam coś takiego w konsoli:

Kod: Zaznacz cały

bfgminer version 3.6.0 - Started: [2013-11-16 20:23:59] - [  0 days 00:06:21]
 [M]anage devices [P]ool management [S]ettings [D]isplay options  [H]elp [Q]uit
 Connected to api.polmine.pl diff 1 with stratum as user marcinpl8712839m1
 Block: ...ba02da38 #269981  Diff:511M ( 3.66Ph/s)  Started: [20:23:58]
 ST:2  F:0  NB:1  AS:0  BW:[  8/  0kB/s]  E:0.00  I: 0.00 BTC/hr  BS:0
 1            | 534.0/317.2/ 0.00Mh/s | A:0 R:0+0(none) HW:10/100%
--------------------------------------------------------------------------------
 BES 0:       | 357.4/317.1/ 0.00Mh/s | A:0 R:0+0(none) HW:10/100%
--------------------------------------------------------------------------------
 [2013-11-16 20:23:58] usb_devinfo_scan: Error opening device: LIBUSB_ERROR_ACCESS
 [2013-11-16 20:23:58] Probing for an alive pool
 [2013-11-16 20:23:58] Pool 0 stratum+tcp://api.polmine.pl:8361 alive
 [2013-11-16 20:23:58] Network difficulty changed to 511M ( 3.66Ph/s)
 [2013-11-16 20:23:58] Stratum from pool 0 detected new block
 [2013-11-16 20:23:58] Pool 0 is hiding block contents from us
 [2013-11-16 20:23:59] Pool 0 now providing block contents to us
 [2013-11-16 20:24:00] BES 0: Work division autodetection failed (assuming 2): got 5601dc26
 [2013-11-16 20:24:25] Stratum from pool 0 requested work update
 [2013-11-16 20:24:25] Pool 0 is hiding block contents from us
 [2013-11-16 20:24:27] Pool 0 now providing block contents to us
 [2013-11-16 20:25:20] Stratum from pool 0 requested work update
 [2013-11-16 20:25:20] Pool 0 is hiding block contents from us
 [2013-11-16 20:25:22] Pool 0 now providing block contents to us
 [2013-11-16 20:26:15] Stratum from pool 0 requested work update
 [2013-11-16 20:26:15] Pool 0 is hiding block contents from us
 [2013-11-16 20:26:19] Pool 0 now providing block contents to us
 [2013-11-16 20:27:10] Stratum from pool 0 requested work update
 [2013-11-16 20:27:10] Pool 0 is hiding block contents from us
 [2013-11-16 20:27:12] Pool 0 now providing block contents to us
 [2013-11-16 20:28:05] Stratum from pool 0 requested work update
 [2013-11-16 20:28:05] Pool 0 is hiding block contents from us
 [2013-11-16 20:28:08] Pool 0 now providing block contents to us
 [2013-11-16 20:29:00] Stratum from pool 0 requested work update
 [2013-11-16 20:29:00] Pool 0 is hiding block contents from us
 [2013-11-16 20:29:02] Pool 0 now providing block contents to us
 [2013-11-16 20:29:55] Stratum from pool 0 requested work update
 [2013-11-16 20:29:55] Pool 0 is hiding block contents from us
 [2013-11-16 20:29:57] Pool 0 now providing block contents to us

Rozumiem że jak teraz mam BES zamiast ICA to chodzi tutaj o "block erupter saphire" więc rozpoznał moje urządzenie poprawnie. Ale dlaczego teraz w tych logach powtarza ciągle
"Stratum from pool 0 requested work update
Pool 0 is hiding block contents from us
Pool 0 now providing block contents to us"
??

[hanti]

usb_devinfo_scan: Error opening device: LIBUSB_ERROR_ACCESS
cos nie tak ze sterownikiem USB

BES 0: Work division autodetection failed (assuming 2): got 5601dc26
cos nie tak z erupterem

na czym to odpalasz ? Jesli to raspberrypi i wpychasz prosto do slotu bez aktywnego huba to moze sie tak dziac
sprawdz na pc z windosem czy ten erupter jest w ogole sprawny

[marcinpl87]

miałeś rację!

podłączałem go do raspberry PI i widać problem był ze zbyt niskim napięciem na porcie USB.

Podłączyłem więc eruptera do kompa z windowsem i zainstalowałem sterownik z http://www.silabs.com/products/mcu/Page ... ivers.aspx . Choć po uruchomieniu bfgminera na windzie miałem:

Kod: Zaznacz cały

Connected to api.polmine.pl diff 1 with stratum as user marcinpl8712839m1
 Block: ...78965c63 #269992  Diff:511M ( 3.66Ph/s)  Started: [21:35:01]
 ST:2  F:0  NB:1  AS:0  BW:[ 26/  0kB/s]  E:0.00  I: 0.00 BTC/hr  BS:0
 0            |   0.0/  0.0/  0.0 h/s | A:0 R:0+0(none) HW:0/none
--------------------------------------------------------------------------------
 BES 0:       |   0.0/  0.0/  0.0 h/s | A:0 R:0+0(none) HW:0/none
--------------------------------------------------------------------------------
 [2013-11-16 21:34:55] Failed to open Device Parameters registry key in fpgautils.c _vcom_devinfo_scan_windows__hubport():444: Nie mo
 [2013-11-16 21:35:01] Probing for an alive pool
 [2013-11-16 21:35:01] Pool 0 stratum+tcp://api.polmine.pl:8361 alive

to jednak potem zaczął działać dobrze:

Kod: Zaznacz cały

bfgminer version 3.6.0 - Started: [2013-11-16 21:17:53] - [  0 days 00:07:34]
 [M]anage devices [P]ool management [S]ettings [D]isplay options  [H]elp [Q]uit
 Connected to api.polmine.pl diff 1 with stratum as user marcinpl8712839m1
 Block: ...78965c63 #269992  Diff:511M ( 3.66Ph/s)  Started: [21:22:41]
 ST:2  F:0  NB:2  AS:0  BW:[  2/  0kB/s]  E:0.03  I: 6.65uBTC/hr  BS:22
 1            | 444.2/334.8/162.2Mh/s | A:17 R:0+0(none) HW:0/none
--------------------------------------------------------------------------------
 BES 0:       | 336.0/332.0/160.8Mh/s | A:17 R:0+0(none) HW:0/none
--------------------------------------------------------------------------------
 [2013-11-16 21:22:41] Stratum from pool 0 detected new block
 [2013-11-16 21:22:42] Stratum from pool 0 requested work update
 [2013-11-16 21:22:42] Pool 0 is hiding block contents from us
 [2013-11-16 21:22:42] Pool 0 now providing block contents to us
 [2013-11-16 21:23:36] Stratum from pool 0 requested work update
 [2013-11-16 21:23:36] Pool 0 is hiding block contents from us
 [2013-11-16 21:23:37] Pool 0 now providing block contents to us
 [2013-11-16 21:23:45] Accepted 4d94fd9d BES 0  Diff 3/1
 [2013-11-16 21:23:53] Accepted 2c3acaee BES 0  Diff 5/1
 [2013-11-16 21:24:10] Accepted 4038c731 BES 0  Diff 3/1
 [2013-11-16 21:24:31] Stratum from pool 0 requested work update
 [2013-11-16 21:24:31] Pool 0 is hiding block contents from us
 [2013-11-16 21:24:32] Pool 0 now providing block contents to us
 [2013-11-16 21:24:38] Accepted 3a5b95dd BES 0  Diff 4/1
 [2013-11-16 21:24:49] Accepted 7efa27d5 BES 0  Diff 2/1
 [2013-11-16 21:25:05] Accepted 659a2311 BES 0  Diff 2/1
 [2013-11-16 21:25:11] Accepted 868d833f BES 0  Diff 1/1
 [2013-11-16 21:25:22] Accepted bcd41256 BES 0  Diff 1/1
 [2013-11-16 21:25:27] Stratum from pool 0 requested work update
 [2013-11-16 21:25:27] Pool 0 is hiding block contents from us
 [2013-11-16 21:25:27] Pool 0 now providing block contents

Jeśli chodzi o tą prędkość " BES 0: | 336.0/332.0/160.8Mh/s" to tylko nie rozumiem, dlaczego to oscyluje wokoło 400 do 120Mh/s ? raz mam 300Mh/s , raz jest 160.8Mh/s a czasami spada nawet do 120Mh/s .

Później podłączyłem ten erupter do huba USB w monitorze (nie mam 100% pewności ale wydaje mi się że jest to hub aktywny) i podłączyłem raspberry pi i widać że erupter działa dobrze.

Bardzo dziękuję za pomoc, jak tylko ubieram 0,01btc żeby przelać je na forum to będę robił napiwki

moje ostatnie pytanie, czy mógłbyś napisać trochę o tym interfac'e bfgminera, albo może znasz stronę gdzie jest dokładnie opisane co znaczy to:
"
Block: ...78965c63 #269992 Diff:511M ( 3.66Ph/s) Started: [21:22:41]
ST:2 F:0 NB:2 AS:0 BW:[ 2/ 0kB/s] E:0.03 I: 6.65uBTC/hr BS:22
1 | 444.2/334.8/162.2Mh/s | A:17 R:0+0(none) HW:0/none
" chodzi mi o te wszystkie akronimy ST F NB AS BW E I hr BS A R HW

[hanti]

w pliku readme sa opisane te oznaczenia
uwazaj z portami w monitorze bo koledze sie spalilo tak wlasnie w jakims monitorze gniazdo usb